No teachers found matching your search. Please try another name.
Prof. Dr. Md. Shawkut Ali Khan
Professor
Koetsu YAMAZAKI, Kousuke
ODA, Md. Shawkut Ali khan, and
Kazuhiko HIROKA, “Development of Simplified Deformation Analysis for 3D-First
Order Analysis” Proc. of the 15th Design Engineering & System Division
Conference, JSME 2005, No.05-27,
pp. 445-448
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. A Comparative Study of Non- Frost Refrigerator Over the Frost Refrigerator
in Economical and Environmental Perspective. The Millennium University Journal,
Vol. 5 (2020), No. 1, pp. 37-42
Anmona Shabnam Pranti, Arif
Mohammad Shahed Iqubal, Md. Shawkut Ali
Khan, Mohammad Kayesar Ahmed “Scenario of electricity trading in South
Asia: Perspective and feasibility of trading between
India and Bangladesh” American Journal of
Electrical Power and Energy Systems, Science Publication Group, 2013; 2(6): pp.
156-165.
Md. Shawkut ALI KHAN, Koetsu YAMAZAKI, Kosuke
ODA and Kazuhiko HIROOKA, “Simplified Deformation Analysis of 3D-bodyby
First Order Analysis”Journal of Advanced Mechanical Design, Systems, and
Manufacturing, JSME, vol. 1 (2007), No. 4, pp. 505-517.
Md. Shawkut Ali khan and Koetsu YAMAZAKI “Modeling Method of StressConcentrated
Members for First Order Analysis”, Proc.
of 3rd CJK-OSM, Kanazawa, Oct 30- Nov.2, 2004, pp. 835-840.
KousukeOda, Koetsu YAMAZAKI, and Md. Shawkut Ali khan, “Element Development of Simplified
Deformation Analysis for 3D- First
Order Analysis”, Proc. of 3rd CJK-OSM, Kanazawa, Oct
30- Nov.2, 2004, pp. 829-834.
Md. Shawkut Ali Khan, and K. Yamazaki “Modeling Method of Stress
Concentrated Members for First Order Analysis- 2nd Report:
Approximation of 3D- members”, Proc. JSME Annual Meeting 2003, No.03-1, Vol.VI,
pp.17-18.
Md. Shawkut Ali khan and Koetsu YAMAZAKI “Modeling Method of
StressConcentrated Members for First Order Analysis –3rd Report:
Approximation of 3Dmembers-”, Proc.
of the 14th Design Engineering & System Division Conference,
JSME, No.04-38, pp. 221-222.
Koetsu YAMAZAKI, Kousuke
ODA, and Md. Shawkut Ali khan,
“Simplified Deformation Analysis for 3D-First Order Analysis”, Proc. of the 14th Design
Engineering & System Division Conference, JSME 2004, No.04-38, pp. 219-220.
Md. Shawkut Ali Khan, Introducing
Firefighting Robot Utilizing GSM Technology, ESP International Journal of
Advancements in Science & Technology, Vol.02(2024), No.1, pp. 27-38.
Koetsu YAMAZAKI, Kazuhiko
HIROKA, KousukeODA, and Md. Shawkut Ali
khan,“Development of Simplified Deformation Analysis for 3D-First Order
Analysis – Consideration of element stiffness derivation via displacement-base
strain energy expression -” Proc. of the 16th Design Engineering
& System Division Conference, JSME 2006, No.06-33, pp. 158-161.
Md. Shawkut Ali Khan, SankeorkumerDebnath, Md. Mofazzal Hossain and Mir
Mohiuddin, “A comparative Study on Diesel Engine and Converted Compressed
Natural Gas (CNG) Engine; Bangladesh Perspective” Proc. of the 2nd international
conference on engineering education for sustainable development, ICEESD 2009,
pp MTE-14
Sankeor kumer Debnath and Md. Shawkut Ali Khan, “ComparativeStudy
of Elastic-Plastic properties of Bulk, Micro, and Nano Materials” Proc. of the
2nd international conference on engineering education for
sustainable development, ICEESD 2009, pp MTE-13.
Mir Mohiuddin and Md. Shawkut Ali Khan “Solar
Photovoltaic Water Pumping for Small Scale Irrigation in Bangladesh” Proc. of the
2nd international conference on engineering education for
sustainable development, ICEESD 2009, pp MTE-11.
Md. Quamruzzaman and Md. Shawkut
Ali Khan, “Nucleonic Control System and
its Applications in Bangladesh (A Case Study)” Proc. of the 2nd
international conference on engineering education for sustainable development,
ICEESD 2009, pp EEE-03.
Mehedi Hasan, Sunjida Haque,
Md. Shawkut Ali Khan, Md. Kamrul
Alam Khan, “Mechanical Modeling
of Dynamic Electrolyte Model: A Biomass
based Nano- leveled Electricity Generation Plant”, Proc.
of National Conference on Physics – 2019,
Nabab Nawab Ali Chowdhury(NNAC) Senate Bhaban, University of Dhaka, Dhaka.
07-09 February, 2019, pp. 167.
Monowar Wadud Hridoy, Md. Shawkut Ali Khan, Rana Ahmad, Md.
Abdur Rahman,C.H.M. Imran Kadir, “Experimental Analysis of Heat Transfer
Improvementof Water Utilizing Double Counter Twisted Tape Insert”,
International Conference on Mechanical, Industrial & Energy Engineering
2020, 19-21 December,2020, Khulna, BANGLADESH, ICMIEE20-206.
Al-Amin Shuvo,
Ziaul Islam, Md.
Shawkut Ali Khan “Design of a Solar PV
based Hybrid AC mini grid System with Load Dispatch
Centre for an Off-grid Area of
Bangladesh”, International Journal of Innovative Research in Electrical,
Electronics, Instrumentation and control Engineering, Vol-9, Issue-7,
July-2021, DOI- 10.17148/IJIREEICE.2021.9721
Abdullah Md, Galib MT, Md. Shawkut Ali Khan, Rahman
T, Hossain MM. Recent advancements in flow control
using plasma actuators and plasma vortex
generators. Heat Transfer.
Md. Shawkut Ali Khan, A CFD Analysis for Evaluating Thermal Performance of Earth
Air Tunnel Heat Exchanger, World Journal of Engineering Research and
Technology, Vol.10 (2024), No. 1, pp. 121-140.
Md.
Shawkut Ali Khan, Analytical Examination of
Nano-Fluid-Assisted Cooling Rate Enhancement in a Car Radiator, American
International Journal of Sciences and Engineering Research, Vol. 6 (2023),
No.1, pp. 1-14.
Md.
Shawkut Ali Khan, Md Iftakharul Muhib. Simulating the
Drag Reduction Model for a Vehicle by Using Vortex Generator. American
International Journal of Sciences and Engineering Research, Vol. 5 (2022),
No.1, pp. 31-45.
Md.
Shawkut Ali Khan, Md Iftakharul Muhib, Mahdee Nafis.
Thermoelectric Power Generation from Waste Heat of Gas Stove by Using the
Thermoelectric Generator. American International Journal of Sciences and
Engineering Research, Vol. 5 (2022), No. 1, pp. 23-30.
Md. Iftakharul Muhib, Md. Shawkut Ali Khan. An overview of health and environmental
threats from the brick kiln industry around the capital of Bangladesh. American
International Journal of Sciences and Engineering Research, Vol. 5 (2022), No.
1, pp. 16-22.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. A comparative study of
multistoried building information modelling (BIM) method & conventional
modelling method. American International Journal of Sciences and Engineering
Research, Vol. 5 (2022), No. 1, pp. 8-15
Md. Shawkut Ali Khan, Md. Iftakharul Muhib.
“A Comparative Study of VRF Air
Conditioning System over the Conventional Domestic Air-Conditioning System,
The Millennium University Journal, Vol. 6 (2022), No. 1, pp.41-58.
Md. Iftakharul Muhib,
RifatAkter, Md. Humaun Kabir, Md.
Shawkut Ali Khan, Md. Shamim Rayhan. “Disseminating the Biomedical Waste
Generation Scenario During COVID-19: An Overview from the Lower Middle Income
Country Bangladesh”, American International Journal of Nursing Education and Practice, Vol. 2
(2021), No. 1, pp. 7-14.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “Disseminating the effect of water hardness on dyeing of cotton
fabric with reactive dyes”, Journal of Biodiversity and Environmental Science,
Vol. 19 (2021), No. 1, pp. 125-133.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib, Md. Kawsar Sajib.
“Disseminating an Automated Irrigation System Using
Solar Energy in Perspective of Bangladesh”,American
International Journal of Sciences and Engineering Research, Vol. 4 (2021), No.
1, pp. 14-25
Md Iftakharul Muhib, Md. Shawkut Ali Khan, Rifat
Akter.“Risk Prioritization of
Environmental Aspects and Occupational Health Safety in Textile Industries of
Gazipur Industrial Area, Bangladesh”, Bangladesh Journal of Multidisciplinary
Scientific Research, Vol. 2 (2021), No. 2, pp. 11-20.
Asrafusjaman Rubel , M. A.
Kabir, Masud Rana, Ariful Islam, Md.
Shawkut Ali Khan “Characterization Analysis of Textured and Diffused
Monocrystalline Silicon Wafer”, European
Scientific Journal, Vol.17 (2021), No.17, pp. 125-132.
Monowar Wadud Hridoy, Md. Shawkut Ali Khan, Mahibuzzaman,
“Experimental Study of Recycling of used engine
oil utilizing various
acids as washing agent”, BAUET Journal, Volume 03,
Issue 01, 2021, pp. 19-27.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “Analyzing the Best Quality
Parameter of Die-Casting Products”, American
International Journal of Sciences and Engineering Research, Vol. 5 (2022), No.
1, pp. 1-7.
Tarazul Mulk Syed Anzam Hossain
Sr. Lecturer
CHARACTERIZATION OF NANOSTRUCTURE SEDIMENTARY CLAY MATERIAL OF NETROKONA DISTRICT
Characterization of Heat Insulating Ceramic Fiber Raw Material for Insulation
Mehedi Hassan Pranta
Lecturer
Abdulla All Noman
Lecturer
Investigate the mechanical strength of laminated composite carbon fiber with different fiber orientations by numerically using finite element analysis
Study to analyze the mechanical strength of composite glass fiber laminated with resin epoxy, resin polyester, and PVC foam under tensile loading conditions by numerically using finite element analysis via Ansys
Empirical analysis of I4.0 implementation enablers in context of Indian manufacturing industries using DEMATEL approach
Simanto Das
Lecturer
Nifat Mouddit Nizhum
Lecturer
Md Hasibur Rahman
Lecturer
Subrata Saha
Lecturer
Taher Hasan Nakib
Lecturer